Used Steel-Pro Pressure Tank, Approximate 6300 Gallons, 304L Stainless Steel, Vertical. Approximate 74” diameter x 318” straight side, dished top and bottom. Internal rated 30/-10 psi at -20 to 300 degrees F. Top entering Cleveland agitator, model BHD2M-5, serial# 12165-03, approximate 4” diameter shaft with multiple turbines and a mechanical seal, driven by a 40hp, 3/60/460 volt, 1775 rpm motor. Side wall baffles, top and side bottom man way, center bottom outlet. Mounted on 4 carbon steel legs. National Board# 1362, serial# 17977D, built 2007.

Used Tank, Approximate 2300 Gallons, Stainless Steel, Vertical. Approximate 78” diameter x 108” straight side, dished top and bottom. Top entering agitator, approximate 3” diameter shaft with multiple turbines and a mechanical seal, driven by a 20hp, 3/60/208-230/460 volt, 1770 rpm XP gear motor. Side wall baffles, top and side bottom man way, center bottom outlet. Mounted on 4 stainless steel legs. No manufacturers tag.

Used Groen Pressure Tank, Approximate 450 Gallons, 316 Stainless Steel, Vertical. Approximate 30" diameter x 144" straight side, bolt on dished top and bottom. Internal rated 45 psi & Full Vacuum at 300 degrees F. Top entering Cleveland agitator, model APD2M-5, serial# 12288-01. Need to verify shaft and blades, driven by a 7.5hp, 3/60/230/460 volt, 1760 rpm motor. Side lug mounts. National Board# 20725, built 1963, altered in 2007

Used Astell Scientific Autoclave, Model U-AVS431D-16559. 316L Stainless steel chamber approximate 26" x 26" x 39" deep, volume 431 liters, internal rated 2.88 bar (41.8 psi) at 143 degrees C (289.4 F), 304 stainless steel jacket rated 2.88 bar (41.8 psi) at 143 degrees C (289.4 F). Serial# PDN40388, built 2014. Certified by Biotechnik, National Board# 219, serial# 8987, year 2014.

Used Tank, Approximate 800 Gallons, Stainless Steel, Vertical. Approximate 60” diameter x 60” straight side, dished top and bottom. Top entering Cleveland agitator, model APDM-4, serial# 12425, approximate 2” diameter shaft with multiple turbines and a mechanical seal, driven by a 3hp, 3/60/230/460 volt, 1750 rpm motor. Side wall baffles, top man way, center bottom outlet. Mounted on 4 stainless steel legs. No manufacturers tag.

Used Enerquip U Tube Shell & Tube Heat Exchanger, Approximately 500 Square Feet, Model BEUB, Stainless Steel, Horizontal. 304L Stainless steel shell rated 150 psi at -20 to 300 degrees F. (218) 1/2" diameter x 108” long 304L stainless steel tubes rated 150 psi at -20 to 300 degrees F. 304L Stainless steel tube sheet, 316L stainless steel head. Openings for tubes (2) 2", openings for shell (2) 3". National Board# 7539, serial# 9659, built 2007.

Used Enerquip U Tube Shell & Tube Heat Exchanger, Approximately 800 Square Feet, Model BEUH, Stainless Steel, Horizontal. 304L Stainless steel shell rated 150 psi at -20 to 300 degrees F. (354) 1/2" diameter x 108” long 304L stainless steel tubes rated 150 psi at -20 to 300 degrees F. 304L Stainless steel tubeshaeet and head. Openings for tubes (2) 3", openings for shell (2) 3". National Board# 7540, serial# 9661, built 2007.

Used Walker Stainless Reactor, 4778 Gallon, 304L Stainless Steel, Vertical. Approximate 102” diameter x 114” straight side, dished top and bottom. Internal rated 45/-15 psi at -20 to 300 degrees F., 304 stainless steel dimple jacket rated 75 psi at -20 to 300 degrees F. Approximate 3” diameter shaft with multiple turbines, no agitator motor. Side wall baffles, 20" top man way, 3" center bottom outlet. Mounted on 4 carbon steel legs. National Board# 5859, serial# WEP-62804-2, built 2007.

Used Walker Stainless Reactor, 4778 Gallon, 304L Stainless Steel, Vertical. Approximate 102” diameter x 114” straight side, dished top and bottom. Internal rated 45/-15 psi at -20 to 300 degrees F., 304 stainless steel dimple jacket rated 75 psi at -20 to 300 degrees F. Top entering Cleveland agitator, model XT2M-6, serial# 12427-01, approximate 3” diameter shaft with multiple turbines driven by a 3 HP, 3/60/208-230/460 volt, 1170 rpm XP motor. Side wall baffles, 20" top man way, 3" center bottom outlet. Mounted on 4 carbon steel legs. National Board# 5858, serial# WEP-62804-1, built 2007.

Used Walker Stainless Reactor, 3100 Gallon, 304L Stainless Steel, Vertical. Approximate 80” diameter x 126” straight side, dished top and bottom. Internal rated 45/-15 psi at -20 to 300 degrees F., 304 stainless steel dimple jacket rated 75 psi at -20 to 300 degrees F. Top entering Cleveland agitator, model XT2M-6, serial# 12428, approximate 3” diameter shaft with multiple turbines driven by a 2hp, 3/60/230/460 volt, 1725 rpm motor. Side wall baffles, 18" top man way, 3" center bottom outlet. Mounted on 4 carbon steel legs. National Board# 5857, serial# WEP-62805, built 2007.

Used Hartel Clean In Place CIP System Consisting Of: (1) Waukesha Cherry-Burrell pressure tank, 396 gallon, 316L stainless steel. Internal rated 30 psi at -20 to 350 degrees F., National Board# 4417, serial# E-342-95, built 1996. (1) approximate 500 gallon stainless steel tank, (1) Allegheny Bradford shell & tube heat exchanger, shell and tubes rated 150 psi at -20 to 300 degrees F., serial# 024395-1-1-1, built 2008, (1) Waukesha Cherry-Burrell centrifugal pump, model 2065LV, stainless steel, serial# 270232-00. Driven by a 10hp, 3/60/208-230/460 volt, 3450 rpm motor, (2) stainless steel control cabinets with an Allen-Bradley PowerFlex 70 drive only, and Allen-Bradley Flex I/O controllers. Mounted on a stainless steel frame.

Used Waukesha Cherry-Burrell Pressure Tank, 264 Gallon, 316L Stainless Steel, Vertical. 42" Diameter x 42" straight side, dished top and bottom. Internal rated 30 psi at -20 to 350 degrees F. Off center top entering Lightnin agitator thru the manway cover model MS6L1, serial#2766305, approximate 1" diameter shaft with a 3 blade turbine, driven by a 1/2 HP, 3/60/230/460 volt, 1745 rpmm motor. Mounted on 4 stainless steel legs. National Board# 4416, serial# E-341-95, built 1996.

Used Champion Tear Circle Hammermill, Model 15X22, Carbon Steel. (2) Jacketed front doors, swinging hammers, approximate 1” diameter screen holes, 9-1/2” x 14-1/2” feed, bottom discharge. Driven by a 50hp, 3/60/460 volt, 3535 rpm motor. Mounted on a carbon steel frame with base. Serial# 102159.

Unused Toyo Centrifugal Pump, Model DEH-72-80-PF4-CD4-D#, Stainless Steel. Rated 200 gallons per minute at 126’ head at 1660 rpm. 4” Inlet, 3” outlet, impeller diameter 11.1”, maximum solid size 1.2”. Driven by a 40hp, 3/60/460 volt, 1775 rpm XP motor. Base mounted. Serial# D-300094.

Unused Alfa Laval Spiral Heat Exchanger, 123 Square Feet, 316 Stainless Steel, Model 1H-L-1T. Hot & cold sides rated 150 psi at -7 to 300 degrees F., inlets (2) 3”, outlets (2) 3”. National Board# 19454, serial# 30112-68441, built 2012.

Unused Toyo Vertical Recessed Impeller Pump, Model DEC-71-50-4E-48-CD4-D, Stainless Steel. Rated 60 gallons per minute at 61.6’ head at 1175 rpm. 2” Outlet, impeller diameter 10.7”. Driven by a 10hp, 3/60/230/460 volt, 1175 rpm XP motor. Base mounted. Serial# D-30242, built 2012.

Unused ProFlow Heating & Cooling Skid, 544 Total Square Feet. Consisting of: (1) API Schmidt heating plate & frame heat exchanger, 372 square feet, model S36-1250-99, National Board# 8002, serial# NP091066-102, built 2010. Hot & cold side rated 150 psi at 32 to 300 degrees F., carbon steel frame, 316L stainless steel plates, 3” flange & sanitary connections. (1) API Schmidt cooling plate & frame heat exchanger, 172 square feet, model S36-750-47, National Board# 8035, serial# NP091066-202, built 2010. Hot & cold side rated 150 psi at 32 to 300 degrees F., carbon steel frame, 316L stainless steel plates, 3” flange & sanitary connections. Mounted on a stainless steel frame.

Unused ProFlow Heating & Cooling Skid, 544 Total Square Feet. Consisting of: (1) API Schmidt heating plate & frame heat exchanger, 372 square feet, model S36-1250-99, National Board# 8001, serial# NP091066-101, built 2010. Hot & cold side rated 150 psi at 32 to 300 degrees F., carbon steel frame, 316L stainless steel plates, 3” flange & sanitary connections. (1) API Schmidt cooling plate & frame heat exchanger, 172 square feet, model S36-750-47, National Board# 8034, serial# NP091066-201, built 2010. Hot & cold side rated 150 psi at 32 to 300 degrees F., carbon steel frame, 316L stainless steel plates, 3” flange & sanitary connections. Mounted on a stainless steel frame.

Used Dual Shaft Lump Breaker, Stainless Steel. Approximate 47” wide x 16-1/2” long feed throat, approximate (2) 3-1/2” diameter shafts each with approximate 3/4” diameter pins. Driven by a 5hp, 3/60/460 volt, 1750 rpm gear motor, ratio 4.64 to 1. No manufacturers tag.

Unused Lightnin Top Entering Agitator, Model 605S25. Ratio 32.1 to 1, output rpm 84. Approximate 19-18” O.D. mounting flange with (12) bolt holes on approximate 4-1/2” centers. Serial# 1000002824570, built 2013. Includes an approximate 3-1/2” diameter x 124” long bolt together stainless steel shaft with (6) bolt on turbine blades. Driven by a 25hp, 3/60/460 volt, 1770 rpm motor

Used FKC Screw Press Parts Machine, Model SHX-800X6000L, Stainless Steel. Consists of an approximate 800mm diameter x 6000mm long screw. Sumitomo reducer, ratio 319 to 1, external screen assembly spray bars, 30hp, 3/60/460 volt, 1175 rpm motor, end plates, miscellaneous screen sections, side panels and guards. Serial# M-2428-1, built 2007.

Used Tank, Approximate 700 Gallon, Stainless Steel, Vertical. Approximate 48” diameter x 90” straight side, dished top, flat bottom. Side man way, bottom outlet. Skirt mounted. No manufacturers tag.

Used- FKC Screw Press, Model SHX-600X3500L, 304 Stainless Steel. Approximate capacity 35-90 kg/hr, depending on product, maximum pressure 0.7 MPa. Approximate 600mm diameter x 3500mm long screw. Top end feed, bottom end discharge, bottom drip pan. Requires drive and reducer. Mounted on an I-beam carbon steel frame. Serial# M-2430, built 2007.

Used Screw Conveyor, Stainless Steel. Ribbon style screw approximate 12” diameter x 112” long. Driven by a 10hp, 3/60/208-230/460 volt, 1760 rpm gear motor, no ratio. No manufacturers tag.

Unused JMW James Machine Works Pressure Tank, 14,000 Gallon, 316L Stainless Steel, Vertical. 120" Diameter x 300" straight side, dished top and bottom. Internal Rated 56 psi at -20 to 300 degrees F. Openings top (3) 1", (3) 3", (2) 4", 10" drive, side bottom 24" manway with davit arm cover, bottom 2", 6", 3" center. Mounted on 4 stainless steel legs. National Board# 3281, serial# 7846, built 2013.

Used Admix Boston Shearpump, Model BSP 24C, Stainless Steel. Approximately 10 to 30 gallons per minute capacity. Approximate 2” inlet and outlet. Driven by a 7.5hp, 3/60/208-230/460 volt, 3525 rpm motor. Mounted on a stainless steel frame. Serial# 26829-1, built 2007.

Used Admix Boston Shearpump, Model BSP 24C, Stainless Steel. Approximately 10 to 30 gallons per minute capacity. Approximate 2” inlet and outlet. Driven by a 7.5hp, 3/60/208-230/460 volt, 3525 rpm motor. Mounted on a stainless steel frame. Serial# 26829-2, built 2007.

Used- Generac Power Systems 300 KW Diesel Generator Set. Model 8533410200, type code SD0300-K369.0D18HPYY C, serial# 2094495, built 2007. John Deere 9.0 liter 6 cylinder engine, model 6090HF485, serial# RG6090L020761. 3/60/277/480 Volts, weather enclosure. Includes a Generac 600 amp transfer switch, model 8533410100, type code GTS060N-3K2LDNCY, serial# 94414.

Used Atlas Copco Oil Free Rotary Screw Compressor, Model ZT 22. Air cooled, 117.2 CFM at 124 psi. Driven by a 30hp motor. Includes an Elektronikon controller. Serial# AII705773, built 2006.

Used Ingersoll- Rand Air Cooled Rotary Screw Air Compressor, Model SSR UP6-20-125. Capacity 83 CFM, rated operating pressure 125 psig. Driven by an approximate 20hp motor. Includes a control panel. 23377 Hours used on meter. Serial# PX6992U06137.

Used Enerquip Single Shell & Tube Heat Exchanger, 573 Square Feet, Model BEMV, 304L Stainless Steel, Vertical. 304L Stainless steel shell rated 150 psi at -20 to 375 degrees F. (394) 3/8" diameter x 174” long 304L stainless steel tubes rated 150 psi at -20 to 375 degrees F. 304L Stainless steel tubeshett and heads. Openings for tubes (2) 3", openings for shell (2) 6". National Board# 7448, serial# 9500, built 2007.

Used Enerquip Single Shell & Tube Heat Exchanger, 573 Square Feet, Model BEMV, 304L Stainless Steel, Vertical. 304L Stainless steel shell rated 150 psi at -20 to 375 degrees F. (394) 3/8" diameter x 174” long 304L stainless steel tubes rated 150 psi at -20 to 375 degrees F. 304L Stainless steel tubeshett and heads. Openings for tubes (2) 3", openings for shell (2) 6". National Board# 7449, serial# 9501, built 2007.

Used- New Brunswick Innova 4330 Refrigerated Incubator Shaker. Serial# 890715514.

Used Enerquip Single Shell & Tube Heat Exchanger, 573 Square Feet, Model BEMV, 304L Stainless Steel, Vertical. 304L Stainless steel shell rated 150 psi at -20 to 375 degrees F. (394) 3/8" diameter x 174” long 304L stainless steel tubes rated 150 psi at -20 to 375 degrees F. 304L Stainless steel tubeshett and heads. Openings for tubes (2) 3", openings for shell (2) 6". National Board# 7450, serial# 9502, built 2007.

Used Enerquip Single Shell & Tube Heat Exchanger, 573 Square Feet, Model BEMV, 304L Stainless Steel, Vertical. 304L Stainless steel shell rated 150 psi at -20 to 375 degrees F. (394) 3/8" diameter x 174” long 304L stainless steel tubes rated 150 psi at -20 to 375 degrees F. 304L Stainless steel tubeshett and heads. Openings for tubes (2) 3", openings for shell (2) 6". National Board# 7451, serial# 9503, built 2007.

Used Yula 3 Pass Shell & Tube Heat Exchanger, Approximately 503 Square Feet, Model WC-3L-168GS, Horizontal. Carbon steel shell rated 108 psi at 40 to 250 degrees F. (93) 1-1/2" diameter x 168” long 304L stainless steel tubes rated 150 psi at 40 to 250 degrees F. 304L Stainless steel tubesheet, cladded heads. Openings for tubes (2) 8", openings for shell (2) 6". National Board# 12639, serial# 20268, built 2007.

Used Yula 3 Pass Shell & Tube Heat Exchanger, Approximately 503 Square Feet, Model WC-3L-168GS, Horizontal. Carbon steel shell rated 108 psi at 40 to 250 degrees F. (93) 1-1/2" diameter x 168” long 304L stainless steel tubes rated 150 psi at 40 to 250 degrees F. 304L Stainless steel tubesheet, cladded heads. Openings for tubes (2) 8", openings for shell (2) 6". National Board# 12636, serial# 20266, built 2007.

Used Yula 3 Pass Shell & Tube Heat Exchanger, Approximately 503 Square Feet, Model WC-3L-168GS, Horizontal. Carbon steel shell rated 108 psi at 40 to 250 degrees F. (93) 1-1/2" diameter x 168” long 304L stainless steel tubes rated 150 psi at 40 to 250 degrees F. 304L Stainless steel tubesheet, Cladded heads. Openings for tubes (2) 8", openings for shell (2) 6". National Board# 12635, serial# 20265, built 2007.

Used- Alfa Laval Spiral Heat Exchanger, Model 1V-L-2C, 1780 Square Feet, 316L Stainless Steel. Hot & cold sides rated 100 psi/Full Vacuum at -20 to 400 degrees F. Removable heads with 316L stainless steel facing. Cold side inlets (2) 6”, cold side outlet 8”, hot side inlet 10”, hot side outlets (2) 8”. National Board# 19061, serial# 30112-68183, built 2010.

Used- Enerfab Reactor, Approximate 18,459 Gallon, 304L Stainless Steel, Vertical. Approximate 144" diameter x 225" straight side, dished top and bottom. Internal rated 10 psi, design vacuum 20" W.C., 304L stainless steel 1/2 pipe coil jacket on approximate 12' bottom sidewall & bottom head rated 150 psi at 300 degrees F. Top entering Lightnin agitator, model 75S20, serial# 1000002508602, ratio 25.53 to 1, output rpm 69. Approximate 3" diameter shaft with turbines, driven by a 20hp, 3/60/208-230/460 volt, 1755 rpm XP motor. Sidewall baffles, top and side bottom man ways, 12" center bottom outlet. Mounted on stainless steel legs. Contract# 101608-1, built 2010.

Used Ingersoll-Rand Sierra Air Cooled Rotary Screw Air Compressor, Model H350A. Capacity 1501 CFM, rated operating pressure 125 psig. Driven by a 350hp, 3/60/460 volt, 1788 rpm motor. Includes an Intellisys VSD-MA control panel and an Allen-Bradley PowerFlex 755 VFD. 23377 Hours used on meter. Serial# TS6979U12080.

Used Ingersoll-Rand Sierra Air Cooled Rotary Screw Air Compressor, Model H350A. Capacity 1501 CFM, rated operating pressure 125 psig. Driven by a 350hp, 3/60/460 volt, 1788 rpm motor. Includes an Intellisys VSD-MA control panel and an Allen-Bradley PowerFlex 755 VFDl. 23377 Hours used on meter. Serial# TS6980U12080.

Used Ingersoll-Rand Heated Blower Desiccant Dryer, Model HB50004HN49S, Inlet Capacity 5000 SCFM. Desiccant 1633 kg per tower, 3/60/460 volt, maximum inlet air 150 psi at 120 degrees F. Serial# 525722. Includes a Spencer S24104C centrifugal blower, serial# 815071 L11, driven by a 30hp motor, (1) Ingersoll-Rand F10100IH compressed air filter, serial# 525722, (1) Ingersoll-Rand F10100IGHT compressed air filter, serial# 525722, and a control panel.

Used Troy Boiler Works Stripper Column, Stainless Steel. Approximate 42" diameter x 504" tall, dished top and bottom. Rated 30 psi at -20 to 300 degrees F. Mounted on an approximate 13' tall carbon steel skirt. National Board# 581, serial# 757, built 2007. Previous Service: Beer Stripper - Ethanol Plant.

Used Troy Boiler Works Stripper/Rectifier Column, 304 Stainless Steel. Approximate 24” diameter x 702” tall, dished top and bottom. Rated 100 psi at -20 to 350 degrees F. Mounted on an approximate 12’ tall carbon steel skirt. National Board# 585, serial# 762, built 2007. Previous Service: Ethanol Plant.

Used Yula 14 Pass Shell & Tube Heat Exchanger, Approximately 660 Square Feet, Model WC-14M-240CS, 304L Stainless Steel, Horizontal. 304L Stainless steel shell rated 100 psi at 40 to 250 degrees F. (126) 1” diameter x 240” long 304L stainless steel tubes rated 150 psi at 40 to 250 degrees F. 304L Stainless steel tubesheet, 304 stainless steel clad heads. Openings for tubes (2) 3", openings for shell 14", 2". National Board# 12654, serial# 20272, built 2007.

Used - Yula 2 Pass Shell & Tube Heat Exchanger, 302 Square Feet, Model WC-2H-144BS, 304L Stainless Steel, Horizontal. 304L Stainless steel shell rated 75 psi at 40 to 250 degrees F. (130) 3/4" diameter x 144" long 304L stainless steel tubes rated 110 psi at 40 to 250 degrees F. 304L Stainless steel tubesheet, carbon steel heads. Openings for tubes (2) 4", openings for shell 10", 2". National Board# 12657, serial# 20275, built 2007.

Used Troy Boiler Works Pressure Tank, Approximate 100 Gallon, 304 Stainless Steel, Vertical. Approximate 24” Diameter x 48” straight side, 2:1 elliptical top and bottom. Internal rated 30 psi at -20 to 300 degrees F. Mounted on 4 legs. National Board# 583, serial# 760, built 2007.

Used Yula 2 Pass Shell & Tube Heat Exchanger, Approximately 238 Square Feet, Model WC-2F-240CS, 304L Stainless Steel, Horizontal. 304L Stainless steel shell rated 150 psi at 40 to 375 degrees F. (76) 1” diameter x 240” long 304l stainless steel tubes rated 100 psi at 40 to 350 degrees F. 304L Stainless steel tubesheet and heads. Openings for tubes (2) 6", openings for shell 6", 3". National Board# 12656, serial# 20274, built 2007.

Used- Yula 6 Pass Shell & Tube Heat Exchanger, 196 Square Feet, Model WC-6F-120BS, 304L Stainless Steel, Horizontal. 304L Stainless steel shell rated 80 psi at 40 to 250 degrees F. (102) 3/4" diameter x 120" long 304L stainless steel tubes rated 120 psi at 40 to 250 degrees F. 304L Stainless steel tubesheet, carbon steel heads. Openings for tubes (2) 3", openings for shell 6", 2". National Board# 12655, serial# 20273, built 2007.