Stainless Steel Pressure Vessels

Used 23400 Gallon 304 Stainless Steel Pressure Vessel. Mfg RECO. Rated 25PSI@270F. 50 HP Philadelphia agitator. (4) Internal Sidewall baffles. 13'OD x 18'8"H. Skirt mounted. National Board #71406. Serial #D-38537-38. Built 1975.

Used 60000 liter 316L Stainless Steel pressure vessel. Manufactured by Mueller. 15832 gallons. MAWP 50 PSI/FV @300F. (3)304 Stainless steel leg mounted. Top flange and manway. National Board #45834. Serial #394205-2. Built 2009. R-Stamp 2023.

Used 12000 gallon 304 stainless pressure vessel. Manufactured by Whiting Metals Inc. Internal rated 2.5PSI/FV @ 150F. Dished top, cone bottom.Internal baffles, dual-flight agitator - Lightnin Right Angle Model 75C10 drive with 10 HP 3/60/230/460 volt motor. Mounted on (4) carbon steel Legs. 12' diameter X 12' high straight side. National Board# 1021. Serial #F-5695. Built 1991.

Used 12000 gallon 316L Stainless Steel Vertical Pressure Vessel. Manufactured by Nooter. Rated 75PSIG@300F. Dome top, dish bottom. 10'D x 17'S/S. Serial #H-5840. National Board# 12259. Built 1990.

Used 11000 gallon 316 L Vertical Pressure Vessel. Manufactured by JD Cousins Inc. MAWP 35PSI/FV@400F. 10'OD x 25'6"OAH. (4) Leg mounted. 24" Davit-mounted side entering Manway. Dome top, Dish bottom. 3" CBO. Serial #998-6. National Board #7092. Built 1998.

Used 5917 Gallon 316L Stainless Steel Pressure Vessel. Manufactured by Kenshan Bexcelle Special Equipment (China). Shell rated 60 PSI/FV@482. Dished top and bottom. 16'L x 8'D. 5' skirt mounted. 4" Center Bottom outlet. Top openings: (3)1", (4)1.5", (2)2", (2)3", (2)4". 24" side manway with davit. National Board #79. Serial #15-A3176. Built 2015.

Unused 5000 Gallon 304 Stainless Steel Vertical Pressure Vessel. Manufactured by DCI. Rated 45PSI/FV@320F. Dished heads. (6) Leg mounted. 102"ID x 232" OAH. National Board stamped. Serial #MS0747. Built 2015.

Used 4,800 gallon vertical 304L stainless steel tank. Mfg Custom Metal. 7' diameter X 14' straight side. With dished heads. 18' overall height. 0.25 shell thickness. Rated 50 psi @ 250°F. Lug mounted.

Used 4600 gallon Stainless Steel Vertical Pressure Vessel. Mfg Ward Tank and Heat Exchanger. Duplex 2205. Rated 100PSI @ 300F. (4) lug mounted. Dome top, dish bottom. Serial #WC-8822. National Board #4858. Built 2014.

Used 4500 Gallon stainless steel pressure vessel with pantleg split discharge. Manufactured by Rossi & Catelli. Rated 72.5 PSI. 8' diameter X 11' straight side, polished stainless steel internals. 6" flanged side discharges, 48" height. Mounted on (4) 8" diameter HD pipe legs. Overall dimensions are 10' diameter X 30' high. Serial #3677. Built in 1994. Last used at food processing facility as an aseptic tank.

Used 4500 Gallon, 304 Stainless Steel Clad, Rated 2070 PSI @ 200 F. 4'6" ID x 36'6" T/T. Vertical mounted on Skirt. Built to ASME Sec. VIII, Div.2 code. Thickness: Top- 1-7/16", Bottom: 1-3/8". High Pressure Separator. Built by Wyatt, S/N: H-8843-74, NB# 4059. Built: 1976. Altered by Continental Fabricators 1993. Weight: 82,000 lbs.

Used 4,100 Gallon vertical 304L-SS Tank. Internal Rated 50 PSI @ 200 deg F. Dished heads. 7' dia x 12' T/T (OAL - 17'). Shell thickness: 0.1875". Lug mounts. Mfg by Best Mfg Co, 1977. S/N: A-2022, NB# 1801. Previous Use: Column Feed Receiver. Approx Wt: 5,850 lbs.

Used 4000 Gallon Horizontal 304L-SS Jacketed Presuure tank. 6' dia x 18' Straight side (21'OAL) Dished heads. Internal rated 35 PSI @ 280 deg F. 304-L-SS Dimple jacket on bottom and side of tank rated 50PSI/FV @ 320 Deg F. Built 1976 by Industrial Alloy, S/N: 28356-2, NB #167.

Used 4000 Gallon Stainless Steel Vertical Vacuum Rated Pressure Vessel. Manufactured by DCI, Inc. Rated 30/FV @ 300F. 8' Dia. x 11' Straight Side Height (15' Overall Height). Dish Top and Dish Bottom. 3" Center Bottom Outlet. Sanitary construction. Insulated. Serial #87PH35575. National Board #950. Built 1987.

Used 4000 Gallon 316L Stainless Steel pressure vessel. Manufactured by DCI. Vessel MAWP 30PSI/FV@275F. Side manway, center bottom. (4) stainless steel leg mounted. Dimensions 9' diameter X 16' height. National Board #4323. Serial #99-PH-60950. Built 1999.

Used 4000 gallon 316L Stainless Steel Agitated Pressure Vessel. Mfg Superior Welding. Shell rated 45PSI@150F. (4) Lug mounted. Dished bottom and top. 9'D x 8'L. 2 HP Chemineer agitator. (4) internal Baffles. Past use Tempered water. National Board rated.

Used 4000 Gallon 316L Stainless Steel Agitated Pressure Vessel. Mfg. Plant Maintenance. Rated 45PSI@180F. DIshed top and bottom. 2HP Chemineer agitator. (4) Lug mounted. 9'D x 8'L. National Board #2112. Serial #MB- 852. Built 1986.

Used 3600 gallon T316 Stainless Steel insulated vertical pressure vessel. Manufactured by Perry Products Co. MAWP 20PSI/FV@250F. Side entering manway. (4) leg mounted. Serial #B-0683-2. National Board #1084. Built 1975.

Used 3500 Gallon jacketed Tank. Manufactured by Evans & Sons Process Tank Co., Inc. Dimple Jacket MAWP 150 PSI @350F. Dome top, Dish Bottom. (4) Leg Mounted. 18" Top manhole. 7ft 6in ID x 9ft6in S/S. Serial #C-90-1968. National Board #457. Built 1990.

Used 3400 Gal 304L-SS vertical Pressure Tank rated 50 PSI @ 300 deg F. 84" dia x 9'3" straight side. Leg mounted. Side manway. Multiple top nozzles. Approx 2400 lbs.

Used 3300 gal 316L Stainless Steel Pressure Vessel. Manufactured by Walker. Model SP. MAWP 50PSI/FV@250F. Insulated 96"ID x 96" Straight Side (11'OAH). Dome Tope, Flat bottom. 18" Side manway. (6) Leg mounted. Serial #6769. National Board #279. Built 1991. Past use Cheese processing.

Unused 3000 Gallon (11.5 m3) 304L Stainless Steel Double Wall Crystallizer. Manufactured by GEA. Jacketed. Internal rated -2.90/43 psi ( -.2/3 BARG) @-13F/203F (@-25C/95C), jacket rated -7.25/43psi (-.5/3 BARG) @-13F/203F (@-25C/95C). 18.5kW motor with top mounted side scraper agitation. 84" dia x 20' tall. NB #1259, Serial #091212096B, Weight 13000 lbs. Built 2013. Previous use: Crystallizer Stage 1 in GEA freeze concentration plant.

Used 2500 Gal. Jacketed Vertical Tank. Manufactured by Xiangshan Tongda Machinery Co. in 2020. Serial #20A009. National Board #7. Jacket MAWP 0.35MPa @148C. (4) leg mounted. Side manway.

Used 2500 Gallon 316 Stainless Steel Horizontal Pressure Vessel. Mfg Industrial Alloy Fab. Past used Reactor Condensate Decanter. Shell Rated 42PSI/FV@300F. Dished heads. Dimensions 15'OAL x 5"Dia. with 4' x 2'6" Bottom Boot. National Board Rated. Built 1996.

Used 2,450 Gallon vertical 304L-SS Tank. Internal Rated 100 PSI @ 400 deg F. Dished heads. 5' dia x 15' T/T (OAL - 29' 6"). Shell thickness: 0.25"; Skirt mount. Mfg by Best Mfg Co, 1977, S/N: A-2379, NB# 1910. Previous Use: Distillate Receiver.

Used 2100 gallon 304L Stainless Steel pressure vessel. Manufactured by Hebeler Welding Co. Inc. Internal MAWP 50PSI/FV@212F. Dished heads. (4) lug ring mounted. National Board # 2579. Serial #H1044. Built 1988. Dimensions 164"OAH x 66"OD.

Used 2000 gallon 316L stainless Steel vertical receiver reactor. Manufactured by M&M. Rated 90PSI @300F. 72" OD x 12' 9" Tall. Dished heads. Leg mounted. National Board #479. Built 1986. Previously used in API facility.

Used Vertical 304-SS 2000 Gallon Tank. Rated 277 PSI @ 210 deg F. 4' 6" Dia X 16' Straight Side. (22' OAH) Dished top and bottom. Shell Thickness: 7/16". Built by CryoChem, 1981. S/N: 5946-1, NB# 1508.

Used Bendel approximately 2,000 gallon 304 stainless steel vertical mix tank. 72” diameter X 106” high straight side. Internal rated 15 PSI @ -20 to 200 degrees F. Welded dished heads. Has middle stiffener ring. National Board# 547, S/N 11920-1/6. Equipped with 3 tier (4) blade each stainless steel agitator powered by 15 HP 3/60/208-230 /460 volt motor. thru Philadelphia model 3855M, 1800 Input / 56 Output, 31.4:1 ratio gearbox. Has (4) internal baffles. (2) 2” and (2) 4” side bottom outlets. 2” center bottom drain. 24” side bottom manway. Top Fittings: (2) 8”, (1) 6”, (1) 4”, (1) 2”, and (1) 12”. Lug mounted. (NOTE: One 8" nozzle is damaged and needs repair to hold rated pressure)

Used MUELLER 2000 gallon, 304-SS Jacketed Vessel. Vertical. Internal Rated 40 PSI (15.27 in.Hg. Vacuum) @ 210 F. Jacket rated 90 PSI @ 210 Deg. F. Jacket Volume –2.34 CU. FT. 60" ID x 14' Straight side. S/N: 175160–2, NB# 25604.

Used Stainless steel 2,000 gallon processor tank, measures 7' diameter x 7' straight side, jacketed vessel with jacket connection manifold on side of tank. Rated for 15 PSI and full vacuum. Tank includes stainless steel sweep-type agitation (less drive) with baffles and internal spray balls. Top head includes 18" diameter manway with cover, various top inlets and side bottom outlet with manual valve. Previously used at dairy processing facility.

Used 2000 gallon 316 stainless steel horizontal pressure vessel. Manufactured by Whiting Metals. 42" dia x 80" tall. Rated 150 psi @650F. Dished Top & Bottom Heads. Built 1997.

Used 2000 gallon 304L Stainless Steel vertical Pressure vessel. Manufactured by Hahn and Clay. 5'D X 12'H. Dish top and cone bottom. Rated 150 PSI @366F. MDMT 40F @ 150 PSI. 6" diameter center bottom on cone bottom, (1) 6" and (6) 2" openings along straight side, and (1) 8", (1) 6", (1) 3" and (2) 2" flange connections in top head. Serial # V3012. National Board # 602. Built 2018. Designed as digester tank for making probiotics.

Used 2000 gallon 304L Stainless Steel vertical Pressure vessel. Manufactured by Hahn and Clay. 5'D X 12'H. Dish top and cone bottom. 6" diameter center bottom on cone bottom, (1) 6" and (6) 2" openings along straight side, and (1) 8", (1) 6", (1) 3" and (2) 2" flange connections in top head. Rated 150 PSI @366F. MDMT 40F @ 150 PSI. National Board #603. Serial # V3006. Built 2018. Designed as digester tank for making probiotics.

Used 2000 gallon 304L Stainless Steel vertical Pressure vessel. Manufactured by Hahn and Clay. 5'D X 12'H. Dish top and cone bottom. Rated 150 PSI @366F. MDMT 40F @ 150 PSI. 6" diameter center bottom on cone bottom, (1) 6" and (5) 2" openings along straight side, and (1) 8", (1) 6", (1) 3" and (2) 3" flange connections in top head. Serial # V3004. National Board # 602. Built 2018. Designed as digester tank for making probiotics.

Used 1500 gallon vertical 316L stainless steel pressure vessel. Manufactured by Wolfe. 66" diameter x 100" T/T; 150FV @475F. Dished top and bottom. On Lug supports. Built in 2002.

Used 1400 Gal Vertical 304L-SS Pressure Tank, rated 50 PSI/FV @ 212 deg F. 5'10" Diameter x 5' Straight Side. Dish top and bottom. (5) 3" Top Nozzles; 3" Center Bottom Nozzle. 20" Side Manway. Wall thickness: 1/4". On Leg Supports. Mfg by Hebeler Welding Co., 1988. S/N: H1038, NB# 2566.

Unused 1393 Gallon 304L SS Pressure Vessel. Mfg Praj Industries. MAWP 25 PSI/FV@230F. Lug Mounted. Dished Heads. 4'5"D x 12'L. Serial #06D058-T1603. Built 2008. Past use Vaporizer.

USED 1300 GAL VERTICAL 316-SS PRESSURE MIX TANK. MFG. BY SUPERIOR WELDING FAB IN 1980. 5' DIA X 8' STRAIGHT SIDE. INTERNAL RATED 15 PSI @ 212 DEG. F; VACUUM RATED 7.5 PSI AT 250 DEG F. FLAT TOP, DISHED BOTTOM. WALL THICKNESS - .375". LUG MOUNTS. WITH 7.5 HP 316SS CHEMINEER 3 BLADE CONVENTIONAL TYPE, AGITATOR, 460V, 3 PH, 60HZ. VESSEL BUILT 1980, S/N: 79111, NB# 5032.

USED 1200 GAL VERTICAL 304L-SS PRESSURE TANK. MFG. BY PHILLIPS STEEL FAB IN 1985. SHELL RATED 50 PSI @ 150 DEG. F. 5' DIA X 7' L. DISHED HEADS. WALL THICKNESS - 1/4". ON LEGS. S/N: 4922, NB# 975. PREVIOUS USE: WASH WATER RECYCLE TANK.

Used Hockmeyer Tank Mounted Triple Shaft Disperser, 304 stainless steel construction, with 100 HP dispersion blade, 50 HP anchor agitator, 30 HP prop blade, mounted on approx. 1200 gallon 304 stainless steel tank, 6' diameter x 5'6" straight side, dished top and bottom, rated 100 psi and full vacuum at 339 F internal, jacketed for 100 psi @ 339 F, with 20" manway, 8", 4", (2) 2" top nozzles (2) 6" bottom outlets, lug mounted, Serial# 2175, National Board# 12.

Used 1200 gallon 316 Stainless steel vertical receiver reactor. Manufactured by Nolte. Rated 90PSI/FV @300F. Dished heads. Leg mounted. 72" OD. X 75" Stragiht side. National Board #2121. Previously used in API facility.

Used 1157 gallon 304 Stainless Steel receiver tank. Manufactured by Alloy Fabricator. 15PSI/FV@295F. Dished heads. Leg mounted. 3'8"dia x 6'9"T/T. 1115 Lb. Serial #158A. Built 1991.

Used 1000 gallon 304 stainless steel vertical pressure vessel. Manufactured by M&M Welding and Fabricating. Rated 90 psi @100F. Dished heads. On leg supports.

Used 1000 gallon 316L Stainless Steel vertical receiver. Manufactured by M&M. Rated 90PSI @300F. Dished heads 72" OD x 115" Tall. Leg mounted. National Board #477. Serial 86-66. Built 1986. Previously used in API facility.

Used 1000 gallon 316L Stainless Steel Vertical receiver. Manufactured by M&M. Rated 90PSI @300F. Dished heads. Leg mounted. Serial #5004-B604. Built 1986. NB 478.

Used 1000 gallon 316 Stainless Steel vertical receiver reactor. Manufactured by Rolock. Rated 90PSI/FV @300F.. Dished heads. Lug mounted. Serial #9554-VA. National Board coded. Serail #9554 V-A. Built 1986. Previously used in API facility.

Used 1000 gallon horizontal 316L stainless steel splitter vessel. Manufactured by Tate Metals Works. 54.75" diameter x 93" T/T; 150FV @450F. Dished Heads. On saddle supports. National Board #402. Serial #00032-03. Built in 2000.

Used 1000 gallon horizontal 316L stainless steel splitter vessel. Manufactured by Tate Metals Works. 54.75" diameter x 93" T/T; 150FV @450F. Dished Heads. On saddle supports. National Board #403. Serial #00032-02. Built in 2000.

Used 1000 gallon 316 stainless steel pressure vessel. Manufactured by Wolfe. Rated 60 psi @160F. Dished Top & Bottom Heads. Built 1983.