Media Mills

Used 50 HP Basket Mill. Manufactured by Dantco (similar to Hockmeyer). Model DBM-500. Basket mill disk pump, agitator with pins, side and bottom screen. Driven by a 50hp, 3/60/460 volt, 1780 rpm motor. Air over oil lift, approximately 54" rise. Post mounted. Dispersing, Milling and size reduction (all in one) process.

USED MS-32 FRYMA Coball Mill, TYPE MSM-32. ORIGINALLY SUPPLIED WITH CERAMIC CONTACT PARTS. CO-BALL MILL MADE BY FRYMA, 1988, MACHINE NUMBER: M13405. MILLING CHAMBER HAS 4.2 LITRES VOLUME. UNIT IS DRIVEN BY 22 KW/50HZ EX MOTOR. MILL IS EQUIPPED WITH NETZSCH FEEDING PUMP FOR DENSE MATERIALS. SHIPPING DIMENSIONS: 1100MM X 1500MM X 1830MM. TECHNICAL DOCUMENTATION INCLUDED. PREVIOUS USAGE: PHARMACEUTICAL SUSPENSIONS.

Used MS-32 Fryma "Coball Mill", for ultra fine grinding of slurries of various viscosities. US Explosion proof design, built by Fryma AG 1993, S/N: M15890. Housing material: painted steel (white epoxy 1.4517). Coolable Grinding elements: Colmony coated Rotor, w/ 4.5 mm grinding gap; Stator/Wear plate: Stainless Steel (AISI-420). With mechanical seal, "min-max" pressure and temperature gauges, with internal working pressure of 2.5 bar (maximum). Unit Includes hydraulic bowl lifting device. Main drive: 30HP Reliance motor with US Ex-Proof machine mounted cabinet (460V-3PH-60HZ). Unit includes "Steimel" product feed pump (gear pump w/ mechanically variable speed control), model T1-60P, with 1/2 HP US ex-proof Reliance motor. O&M Manual included. Previous usage: Pharmaceutical Industry. (Note: Unit requires new hydraulic lifting cylinder)

Used MS-32 CoBall Mill, manufactured by Fryma AG, for ultra fine wet grinding. Mach No. M16559, 2.5 Bar internal. 2.0 Bar Jacket. Standard 420-SS, coolable Rotor/Stator/Lid, Hydraulic lifting device for stator. White epoxy Exterior. Built 1994.

Used Fryma model MS-32 Coball Mill, Type: MSP-32, unit rated 2.5 bar internal, 2.0 bar jacket, Unit driven by 30 HP, 3/60/460 volt motor, Positive Displacement Feed Pump Driven with Motor, mounted on base with control panel, rated app. 90- 240 liter/ hour depending on product, Machine No. M15750, Built 1992. Unit requires new rotor. Stator in good condition (former service- cosmetics)

Used 20 Liter Horizontal Netzsch Media Mill. 25 HP Vari speed drive. XP Controls, amp meter, push buttons, etc. Monolox style Rotor, Manufactured by Netzsch (Germany), 1981, S/N: 204 220, Fig No 506.

Used 25 HP Premier SuperMill media mill. Model HM-15VSD. Carbon steel jacketed chamber and disks. 16.5 liter gross capacity. 15 liter working capacity chamber. Mechanical seal with seal pot. 25 hp 460 volt xp motor. .75 hp xp on board feed pump. On-board xp controls. Serial# HM15-90614-92-001. Built 1996.

Ashizawa Vertical media "pearl" mill. Agitator motor 11 kw, 480 v, Shaft speed 71 to 287 RPM. Capacity of grinding vessel 41.6 ltr. Mechanical Seal. Model# SP50TEX-V Serial# 91M126-1 316 Stainless Steel contact parts.

Used Fryma model MS-18 Coball Mill , Type- MSP-18, unit rated 2.5 bar internal, 2.0 bar jacket, Unit driven by 10 HP, 3/60/460 volt motor, Positive Displacement Feed Pump with Motor, mounted on with control panel, rated app. 20- 80 liter/ hour depending on product, Serial# M13895, Built 1989. (former service- cosmetics)

Used Fryma Coball-Mill, Type MS-12, for ultra fine wet grinding. Machine number M14687, built 1992. Hardened Stainless Steel grinding surfaces with jacketed stator for cooling. Suitable for steel, zirconium or ceramic grinding media. Mill motor 3 KW (5 Hp), 240/480 Voltage transformer. Includes product Feed Pump. Previous Use: Cosmetic.