Conveyors

Used Wirtz 310" long x 44" wide conveyor. Driven by a 1-1/2hp 3/60/230/460v 1762rpm motor through a reducer. No manufacturers tag.

Used 360" long x 36" wide Conveyor. Driven by motor through reducer. No Manufacturer tag.

Incline Section of Portable Conveyor, with Aprox. 36" W Belt, with 2 hp Drive, Overall Length Aprox.: 144" L, Mounted on S/S Portable Frame.

Straight Section of Discharge Conveyor, Overall Length: Aprox. 22' L, with Aprox. 34" W Belt, with Plastic Side Wall, On S/S Track, with S/S Platform & Drive (LOCATED IN CHAMPAIGN, IL)

Unused 32" Wide stainless steel vibrating conveyor. Mfg Carrier Vibrating Equipment. Posi-Flow Model BM-2440F. Trough is 32" wide X 26' long. Stroke 7/8, RPM 371. 10 HP 3/60/230-460 motor. 9.2 Amps. Weight 20,000#. Serial# 26784. Built 2007.

Straight Section of Infeed Conveyor, with S/S Infeed Chute with S/S Side Walls, Overall Length Aprox. 14' L, with Aprox. 30" W Belt, Mounted on S/S Frame (LOCATED IN CHAMPAIGN, IL)

Used- Wirtz 350" long x 12" wide conveyor. Driven by a 1/2hp 3/60/230/460v 1700rpm motor through a reducer. Serial# 4319-BRS-43, built 2019.

Straight Section of Roller Conveyor, Aprox. 12' L, with Aprox. 28" W Rolls (LOCATED IN CHAMPAIGN, IL)

Straight Section of Roller Conveyor, Aprox. 8' L, with 25-1/2" W Roll, Aprox. 29" H (Roll to Ground) (LOCATED IN CHAMPAIGN, IL)

Straight Section of Grinder Shuttle Conveyor, with Aprox. 2-1/2 hp S/S Clad Drive, Aprox. 25" W Belt, Overall Length of Belt: Aprox. 92" L, with Hydraulic Pump System (LOCATED IN CHAMPAIGN, IL)

Used Titan 348" long x 18" wide conveyor. Driven by a 1hp 3/60/230/460v 1760rpm motor through a reducer 40:1 ratio. Serial# 2018189.

Used Twin Screw Conveyor Feeder. (2) Approximate 18" diameter x 120" long x 8" pitch screws. 18" Diameter top end feed with a bolt on hopper, end bottom discharge. Includes a reducer, no motor.

Used 14" Dia KWS Manufacturing Enclosed Tube Screw Conveyor, Model 14DIAX18-OLG, 304 Stainless Steel, Horizontal. 14" Diameter x 216” long x approximate 3" pitch screw, approximate 8.1 screw rpm. Designed to convey 11 cubic feet per hour of 60 pounds per cubic foot material. Jacketed trough rated 247 psi at -20 to 392 degrees F. Driven by a 1hp, 3/60/230/460 volt, 1650 rpm gear motor, ratio 204.42 to 1. Mounted on a saddles. Serial# 0085552, built 2012.

Arrowhead "U" Shaped Conveyor, with Aprox. 10" W Plastic Conveyor Chain, Overall Length: Aprox. 27 ft. L, with Drive, Mounted on S/S Frame (LOCATED IN CHAMPAIGN, IL)

Incline Section of Conveyor, Overall Length: Aprox. 50' L, Overall Height (Peak to Floor): Aprox. 120" H, Mounted on S/S Frame

2-Sections of ACS Roller Conveyor, (1) Aprox. 153" L with Drive & (1) Aprox. 184" L (LOCATED IN CHAMPAIGN, IL)