Home » Equipment » Extruders » Single Screw
Phoenix Equipment is a global buyer and seller of unused, used and reconditioned Single Screw Extruders.
RESIGUES EXTRUDER, 12/1 TOTAL FLIGHT LENGTH. 23,500 LBS/HR. CARBON STEEL 1000 PSIG DESIGN PRESSURE @ 698 DEG. F. DESIGN TEMPERATURE. 7'0" LONG X 6" WIDE X 7'0" HIGH. MATERIAL BEING EXTRUDED-MOLTEN POILYMER CONTAINING NYLON 6 FIBERS.
Unused 24" Meltblown line. Major components include: extruder and base. Manufactured by US Extruders. 2.5" Dia Barrel 24:1 L/D with motor and gearbox 4 zone with 20HP motor and VFD. Serial #000002. Built 2018. Electrically heated melt filter with manual screen changer, Polymer melt pump with VFD, 24" die and nozzle, Pneumatic pellet loader, 35kW Air heater, 450 CFM blower, Stainless Steel forming screen, Vetaphone winder with pneumatic tension control and HMI Central Controls.
2005 Readco S/S Extruder, Machine 5 Inch C.P., S/N 108530, with Some S/S Spare Parts, Includes (2) S/S Augers, (2) S/S Heads with Portable Cart, with Reliance 30 hp Motor, 230/460 Volts, 3 Phase, with S/S Platform, with S/S Handrails & S/S Grating (NOTE: Missing Some Parts--See Photographs)
Used 3.5" Beringer Slide Plate Screen Changer. Model #1228-M-315, serial #R31006. Includes hydraulic pumping system. Screen changer mounted on stand supplying approximately 42" discharge height. Max operating pressure: 7500. Max operating temperature: 600 degrees F.
Used 2.5" 24/1 L/D Davis Standard air cooled Extruder. Model #2-1/2IN25/MK-5. Temperature control panel with Eurotherm and Athena instruments. 40 hp AC motor with Safetronics GP10 VFD drive. Gearbox 17.28/1 ratio with 75 hp rating. Built 1995.
Used 2.36” 32:1 L/D Vented Single-Screw Extruder. Manufactured by Gloucester. Barrel: 45” centerline height. Driven by a 50 hp DC motor and SCR control. Gearbox: 9.48:1 ratio, serial 140. Top center feed throat, includes temperature control panel and 5-hole strand die. Built 1986.
Used 2" Olmas Model C2-84 Water Cooled Corrugator. Chain driven. Will accomodate 10-55mm min/max product. Includes operator control. Serial #6071190. Built 2007. Also see stock #21662
Used 2" O.D. x 8" Wide Randcastle Sheet Extrusion 3-Roll Stack including Pull Roll Station and Single Position Winder.
Used 1.5” 24:1 L/D Single-Screw Extruder. Manufactured by Killion. Model KL-150. Includes: (3) control panels, Zenith melt pump with 2 hp motor. Model PEP-10 rated at 3.4-68 lbs/hr spare grooved feed throat, and (2) transformers, miscellaneous parts. Serial #10628
Used Olmas Model C2-90V water cooled Corrugator. Chain driven. Will accomodate 10-55mm min/max product. Includes operator control. Built 2007. Also see stock #21660
Single screw extruders work by having one screw operating within the cylinder to combine the materials and thrust them through the die to form the final product shape. These are used for the manufacture of films and sheets, pipes and profiles. They require minimal maintenance and are quieter than twin screw design.
Major Manufacturers of Single Screw Extruders include: Davis Standard, Egan, Gloucester, NRM, Merrit, Sterling Welex, Entwistle
Click here for information on Twin Screw Extruders.