Cogeneration Power Plant w/ Solar Centaur 50 Gas Turbine Generator - 4.25 MW

Stock # 1013

Capacity 4.25 MW

Products Not Listed

Sold

View Similar Items Sell Similar Equipment

Overview

This Cogeneration Power Plant includes a 4.25 MW Solar Centaur Type H Gas Turbine Generator Set model GSI-CU-KA, with: (1) Solar Centaur 50 Gas Turbine version 5701, Engine ID EH5701-59-DW, Power 4138/4060 (G/L), NGP 14951 60 HZ/14944 50 HZ, IGV Setting 8.0, T5 Base 1297 F/1288 F (G/L), Setpoint Full Load 1400 F/1400 F; (1) 4.25 MW Brushless Synchronous AC Generator model #A255800000; (1) 40,000 lbs/hr Energy Recovery Inc. Heat Recovery Steam Generator (HRSG) boiler with economizer Model #S3-1816, design pressure 200 psig, operating pressure 100 psig, feedwater temp 228 F, Total Boiler Heating surface area 13,570 Sq Ft, 288 tubes x 2" OD. Unit comes with a Davis 16.6 million BTUH natural gas fired duct burner; and (1) 50,000 lbs/hr Tampella Power Package Boiler model DS-45, two drum water tube type boiler. 50,000 lbs/hr of steam, 100 psig operating press., 200 psig design press., saturated steam temp., 228 F feedwater temp., 3925 Sq Ft total heating surface, 555 Sq Ft radiant heating surface, 3370 Sq Ft convection heating surface, 955 Cu Ft furnace volume, natural gas/#2 oil fueled. Comes w/ Tampella Power Faber Type "WB" Burner Unit, model W01-23.5, 3163 lbs/hr of oil and 64,550 CFH gas. 13'6" H x 19'8" L x 11' W OAD.

Major Equipment

Specifications:
12,270 kJ/kW-hr Heat Rate; 68,680 kg/hr Exhaust Flow; 510 ºC Exhaust Temperature; 11.5 - 50.4 tonnes/hr Steam Production; Has Axial Exhaust and SoLoNOx. Comes with Heat Recovery System Generator (HRSG) and Boiler.

Centaur 50 Gas Turbine Specs: Industrial, Single Shaft • Axial Compressor – 11 Stage – Variable Inlet Guide Vanes – Pressure Ratio: 10:6:1 – Inlet Airflow: 18.8 kg/sec (41.4 lb/sec) – Axially Split Case • Combustion Chamber – Annular Type – Conventional or Lean-Premixed, Dry, Low Emission (SoLoNOx ™) – 12 Fuel Injectors –Torch Ignitor System • Turbine – 3 Stage, Reaction Max. Speed: 14,950 rpm • Bearings – Journal: Tilting Pad – Thrust: Tilting Pad (Active) and Fixed Tapered Land (Inactive) • Coatings – Compressor Stators and Drums: Inorganic Aluminum –Turbine Nozzles and Blades: Precious Metal Diffusion Aluminide • Axial Position Probe, Proximity Probes, Keyphasor and RTDs. Main Reduction Drive: Epiclycic Type, 1500 rpm or 1800 rpm, Accelerometer. Generator: Salient Pole Type, 3 Phase, 6 Wire, Wye Connected, Synchronous, with Brushless Exciter.

This Caterpillar Solar Centaur Dual Fuel 4.3 MW Natural Gas Turbine Generator uses Combined Heat & Power (CHP) Technology. Combined heat and power (CHP), also known as cogeneration, is the simultaneous production of electricity and heat from a single fuel source, such as: natural gas, biomass, biogas, coal, waste heat, or oil. CHP provides: Onsite generation of electrical and/or mechanical power. Waste-heat recovery for heating, cooling, dehumidification, or process applications. Seamless system integration for a variety of technologies, thermal applications, and fuel types into existing building infrastructure. The two most common CHP system configurations are: Gas turbine or engine with heat recovery unit & Steam boiler with steam turbine.