Used VWR Gravity Convection Oven; Model 414004-556. Interior dimensions approximate 12"W x 14-1/2"T; 2 Shelves. 600 Watt. 1/60/120 volt. Serial# 0411406116L032

Used Mac Process Rotary Airlock Feeder; Model MD75. 12" X 12" Inlet/outlet. Driven by a 2hp; 3/60/208-230/460 volt motor. Serial# 1100200154-020-1.

Used XChanger AA Series Industrial Air Cooled Heat Exchanger, Model AA-1000. 24" Diameter fan, 4" inlet outlet. Serial# 0811-B12662.

Used Laidig Systems Steel Bolted Silo, Approximate 44,000 Cubic Feet, Model 8330-35' Reclaimer, Carbon Steel. Approximate 35’ diameter x 46’ straight side, slight coned top, 30 degree coned bottom. 17' x 22' and 17' x 40' Rail Drive through opening. 54" Bin vent flange. (4) Access doors above 30" Cone hopper with Reclaim Screw. 500TPH. Full diameter access platform at 42'. Includes rail dormer, 8' x 8' x 4'T service platform, crossover platform for roof. Built 2011.

Used Laidig Systems Steel Bolted Silo, Approximate 44,000 Cubic Feet, Model 8330-35' Reclaimer, Carbon Steel. Approximate 35’ diameter x 46’ straight side, slight coned top, 30 degree coned bottom. 17' x 22' and 17' x 40' Rail Drive through opening. 54" Bin vent flange. (4) Access doors above 30" Cone hopper with Reclaim Screw. 500TPH. Full diameter access platform at 42'. Includes rail dormer, 8' x 8' x 4'T service platform, crossover platform for roof. Built 2011.

Used Bry-Air Dehumidification System, Model VFB-3-E-400. Nominal process 1,250 CFM, normal reactivation 417 CFM. Reactivation heat source 22.59 kw. 190 Degrees F. Process motor 3HP. React motor 0.75HP both 480/3/60. NEMA 4 enclosure. Serial# 2012E9406.

Used Bry-Air Dehumidification System, Model VFB-3-E-400. Nominal process 1,250 CFM, normal reactivation 417 CFM. Reactivation heat source 22.59 kw. 190 Degrees F. Process motor 3HP. React motor 0.75HP both 480/3/60. NEMA 4 enclosure. Serial# 2012E9405.

Used Sullair S-Energy 3700 Air Cooled Rotary Screw Compressor, Model 3707/A. Rated approximate 250 ACFM at 100 psig, 50hp motor. Serial# 201205020016. Includes a Sullair DHL-250 dryer, serial# HDJEFAA307.

Used Siemens MCC Center

Used Truck Loadout Station Consisting Of: (1) Truck loadout feed bin, approximate 1400 cubic feet, carbon steel. Approximate 12' diameter x 13'2" straight side, flat top coned bottom. (1) Top mounted dust collector, (1) live bottom bin. Frame mounted with approximate 14'6" truck drive in clearance.

Unused American Equipment Co. Overhead Indoor Crane, 5 Ton, with a 136" Span. Includes 20 Stahl Chain Hoist. Beam dimensions approximately W18x65". Bridge driven by approximately (2) .5hp motors. Trolley driven by approximately (1) .6hp motor. Chain hoist driven by approximately (1) 7.8hp motor. Serial# 29087.

Unused American Equipment Co. Overhead Indoor Crane, 10 Ton, with a 16' Span. Includes 66 Stahl Chain Hoist. Beam dimensions approximately W21x93". Bridge driven by approximately (2) 1.5 hp motors. Trolley driven by approximately (1) 2 hp motor. Chain hoist driven by approximately (1) 15.5 hp motor. Serial# 29086.

Used Trio Engineered Products Over The Belt Magnet Collector Belt Conveyor. Approximate 30" wide x 80" long with 24" x 2" deep trough. Driven by a 5hp, 3/60/230-460/1745 rpm motor with reducer, no ratio. Serial# 034, built 2011.

Used Hosokawa Alpine Air Jet Sieve, Model E200LS. Includes industrial vacuum cleaner. Serial# PO 200259. Built 2012

Used Clyde Bergemann Rotary Airlock Feeder, Model 18" XL, Carbon Steel. 18" x 18" feed, driven by a 3hp, 3/60/230/460 volt, 1755 rpm motor. Control panel.

Used Clyde Bergemann Rotary Airlock Feeder, Model 18" XL, Carbon Steel. 18" x 18" feed, 10" outlet, driven by a 3hp, 3/60/230/460 volt, 1755 rpm motor. Includes control panel with Allen Bradley Powerflex. Mounted on painted carbon steel frame.

Used Clyde Bergemann Rotary Airlock Feeder, Model 18" XL, Carbon Steel. 18" x 18" feed, 10" outlet, driven by a 3hp, 3/60/230/460 volt, 1755 rpm motor.

Used Clyde Bergemann Rotary Airlock Feeder, Model 18" XL, Carbon Steel. 18" x 18" feed, 10" outlet, driven by a 3hp, 3/60/230/460 volt, 1755 rpm motor. Includes control panel with Allen Bradley Powerflex. Mounted on painted carbon steel frame.

Used XChanger AA Series Industrial Air Cooled Heat Exchanger, Model AA-500. 18" Diameter fan, 4" inlet/outlet. serial# 1208-B11337.

Used Mac Process Screw Conveyor, Carbon Steel. Non-jacketed trough approximately 84" long x 22" wide x 17"" deep. Approximate 3"" diameter shaft with 12" pitch. Driven by a 1.5hp; 3/60/460 volt; 1750 rpm gear motor; no ratio. Approximate 18"" diameter discharge. No top cover.

Used Mac Process Screw Conveyor, Carbon Steel. Non-jacketed trough approximately 84" long x 22" wide x 17" deep. Approximate 3" diameter shaft with 12" pitch. Driven by a 1.5hp; 3/60/460 volt; 1750 rpm gear motor; no ratio. Approximate 18" diameter discharge. No top cover.