Scraped Surface Heat Exchangers

Used 9 Sq Ft Waukesha-Cherry Burrell (a SPX brand) Votator II Horizontal 6x72 Scraped Surface Heat Exchanger. Shell MAWP 600PSI@400F. Jacket MAWP 250PSI@400F. Mounted on frame on casters. 20HP Motor. Approx 120"OAL x 74"H x 22" W. Serial #A7910. Built 2010. Past use Nutraceuticals. Included are (1) unused spare Heat Transfer Tube (16319A) and (1) used spare heat transfer tube (16319B) in crate and (1) unused Spare mutator shaft (16319C) in crate.

Used 9 Sq Ft Waukesha-Cherry Burrell (a SPX brand) Votator II Horizontal 6x72 Scraped Surface Heat Exchanger. Shell MAWP 600PSI@400F. Jacket MAWP 250PSI@400F. Mounted on frame on casters. 20HP Motor. Approx 120"OAL x 74"H x 22" W. Serial #A7909. Built 2010. Past use Nutraceuticals. Included are (1) unused spare Heat Transfer Tube (16320A) and (1) unused Spare mutator shaft (16320B) in crate.

Used 6 sq.ft APV Scraped Surface Heat Exchanger 6" dia x 48" long. Stainless steel rotor, 2 blade design. Driven by 10 HP, 3/60/208-230-460 volt, 1720 RPM, Drip Proof Motor, in self contained cabinet.

Used 6 Sq Ft Alfa Laval Viscolab Scraped Surface Heat Exchanger System. Nickel & Stainless Steel. Dual process tower integrated system consisting of: (1) Alfa Laval Contherm scraped surface heat exchanger, model 6 x 3, 3 square feet heating surface. Internal rated 450 psi at 315 degrees F., jacket rated 225 psi at 315 degrees F., serial# HC3058NCC, built 1985, driven by a 7.5hp, 3/60/380 volt, 865 rpm motor. (1) Alfa Laval Contherm scraped surface heat exchanger, model 6 x 3, 3 square feet heating surface. Internal rated 300 psi at -30 to 300 degrees F., jacket rated 250 psi at -30 to 300 degrees F. serial# HC9002NCC, National Board# 261, built 2007, driven by a 5.5hp, 3/60/380 volt, 1130 rpm motor. Mounted within a support structure with a 1/2hp hydraulic raise and lower for rotors. Includes (1) spare 6 x 3 Contherm chamber, serial# HC9591NCC, National Board# 511, built 2009, control panel with SAMI frequency converter and Altivar drives, Alfa Laval plate heat exchanger with tank, (4) pumps, miscellaneous piping and valves.

Used Laboratory Scraped Surface Heat Exchanger. Mfg Waukesha-Cherry Burrell. Model 3 x 12 BWS. Stainless Steel. 3" id x 12" long barrel, 2. 5" diameter two blade rotating mutator shaft. Shell Rated 400PSI @ 375F. Jakcet rated 150PSI @ 375F. Mutator shaft driven 5HP adjustable speed drive. 45 to 450 rpm, 230/460/3 phase. Mechanical rear main seal with flushing capabilities, factory controls featuring product inlet/outlet and jacket in/out temperature sensing to single digital readout with multifunction selection, mounted in elevated stainless steel stand with casters. Serial # 34551. Past use branded cosmetic product development.

USED VOTATOR-CHERRY BURRELL SCRAPE SURFACE HEAT EXCHANGER, MODEL 1C312L, SERIAL # 35633VA. FEATURES 0.7 SQUARE FEET OF HEAT EXCHANGE SURFACE IN 3" X 12" BARREL, MANUFACTURER RATES HEAT EXCHANGER TO 400 PSI @ 375 DEGREES F ON PRODUCT SIDE AND 150 PSI @ 375 DEGREES F ON JACKET, ALL STAINLESS STEEL, SANITARY PRODUCT CONTACT SURFACES, STANDARD MUTATOR SHAFT WITH DUAL FLOATING BLADES, 2 HORSEPOWER RELIANCE VARI-SPEED DRIVE, 83-830 RPM OUTPUT, 230/3 PHASE VOLTAGE, MOUNTED ON PAINTED FACTORY BASE WITH SS FRAME AND CASTERS. FORMERLY USED IN PHARMACEUTICAL SERVICE.

Used scraped surface heat exchanger. Manufactured by Chemtech. 60 hp/460V/3ph, 1785 rpm motor. Motor dimensions 28" long x 16" diameter. Jacketed section dimensions 89" long x 24" diameter. National Board #54. Stamped for shell at 1015 psi at 122F. Jacket at 261 psi at 104F. Model 317-A1PM. Serial #CC1108-E302. Built in 2012.