Gas-to-Liquids Plants for sale

Wax Upgrade Plant Available with Real Estate. Built 2015, Never Used. Modular design, mostly stainless-steel components, unit consists of (2) Hydrogenation Units; (2) Short Path Distillation Units; and (1) Wipe Film Evaporator Unit. The plant was never operated, however, the expected capacity of the plant as originally designed was as follows: J100 Hard Wax: ~19,600 tpa; J75 High Melt Wax: ~2,700 tpa; J55 Mid Melt Wax: ~10,000 tpa; J40 Low Melt Wax: ~1,700 tpa; Distillate: ~200 bpd; Naphtha: ~63 bpd. Full technical documentation available. Unit can be purchased with real estate (Lake Charles, LA location) and SMR Syngas Plant #542 and Fischer Tropsch GTL Plant #543 for operation in place.

Fischer Tropsch Reaction Unit, part of Gas-to-Liquids Plant, Available to Operate in Place in Lake Charles, Louisiana. (2) Unused Fischer-Tropsch reactors - 78,000 sq ft shell and tube exchangers with FT catalyst packed inside the tubes. Originally designed for 1170 BPD of F-T products (wax, diesel and naphtha) or 1123 BPD on an “Equivalent Diesel” basis. The reactors are 11’ diameter with 32’ long tubes which are rated for 500 psig at 500 F. All of the steam-generation equipment is included for capturing the FT reaction exotherm. All of the equipment was constructed in 2015 and most of the downstream process-contact material of construction is 304L stainless steel. The Fractionation Column is 3’ diameter by 90’ tall and is constructed of 304 stainless steel. Column system is designed to distill about 13,300 lbs/hr of mixed hydrocarbon feed from a Fischer-Tropsch Gas-to-Liquid (GTL) reactor into four product streams (Wax, diesel, water, Naphtha). It is rated for 50 psig/full vacuum at 650o F. It has four packed sections with four product “take-offs” (overheads, two side-draws, and bottoms). All associated equipment is included such as the feed heater, condenser, two accumulators, and four overheads product/reflux pumps. This system was manufactured in 2015 and is almost entirely 304 stainless steel construction. System includes all available connecting piping, valves, instruments, and control devices. Unit can be purchased with real estate (Lake Charles, LA location) and SMR Syngas Plant #542 and Wax Upgrade Plant #544 for operation in place.

1,100 BPD Gas-to-Liquid facility for sale. The facility includes nine process sections: (1) Feed Preparation; (2) Steam Methane Reformer (SMR); (3) Syngas Cooling Train; (4) Syngas Compression; (5) Hydrogen Separation (membrane process); (6) Fischer-Tropsch Synthesis; (7) Product Fractionation; (8) Wax Hydrogenation; (9) Wax Short-Path Distillation. The 46.5 MMSCFD Linde-designed SMR was commissioned in 1994 and operated as a syngas plant for 10 years. It was re-designed by Linde in 2015 for supplying syngas to the new GTL facility. The Fischer-Tropsch reactor and the product fractionation units were manufactured in 2015 to produce wax (J40, J54, J70 and J100), diesel and naphtha from syngas. Maximum wax output is 10,000 Lbs/hour. The plant has Yokagawa DCS control system. The facility includes 10.5 acres of land with easy transportation of railway and highway. Complete technical documents available.

Used 3 BPD Pilot Gas-to-Liquids (GTL) plant for sale immediately available. The plant was built in 2013 and had the first liquid production in 2014. It includes one (1) syngas reactor and four (4) Fischer Tropsch (FT) reactors. The syngas reactor has design pressure up to 38 bar and design temperature up to 1400 degree C methane flow rate up to 800 L/minute. Rhodium catalyst in Syngas reactor. Conversion of methane to Syngas 65% (commercial goal 80% with 80% selectivity to Hydrogen at a H2:CO ratio of 2:1). Cobalt catalyst in FT reactor. The equipment is skid-mounted for easy relocation and set-up.