Used Flaker 59"W 304 stainless steel enclosed horizontal belt flaker with Pastillator. Manufactured by Steel Belt Systems SRL (SBS) (Italy). serial #RP2 177 12 5. 59"W x 59'L (1.5m wide x 18000mm) cooling length 301 (NICRO 12.1) stainless steel belt. 63' (19250mm) belt length between center of rolls. 30 - 47 rpm belt speed. 38500mm total length of belt. 1mm belt thickness. (3) cooling zones, zone 1 = 5.5m long (3 bar @ 5-9 degrees C), zone 2 = 6m long (3 bar @ 5-9 degrees C), zone 3 = 6.5m long (3 bar @ 5-9 degrees C), (179) plastic cooling nozzles, (2) 800mm wide 304 stainless steel drums, belt is driven by 5.5kw, 3/50/60/400-690/460 volt, 1460/1765 rpm CE IP55 motor via 88.17:1 ratio, 17 rpm reduction gearbox, belt enclosed in a 304 stainless steel housing, pneumatic operated belt tensioner, belt with bakelized fiber scraper blades, (1) 120mm diameter x 1.4m wide 304 stainless steel Roll Drop pastillator for distributing the liquid drops onto the cooling belt, 8mm toothed rotor pitch, type 3 x 1mm, comb material TEKAPEEK, 105 degrees C, driven by 2.2kw, 3/50//60/230-400 /265-460 volt, 1445/1755 rpm CE IP55 motor via 13.91:1 ratio, 104 rpm reduction gearbox. Pastillator with pneumatic operated raise/lower mechanism, belt with pneumatic operated knife discharge with a brass blade, 304 stainless steel water trays, built on controls, Thermo Scientific model MINI-11-101F weight integrator, emergency stop button and pull cord, all mounted on a Galvanized carbon steel frame, approx 20600mm total length of flaker, (1) discharge belt conveyor.