Complete High-Volume Craft Distillery System. Capacity up to 10,000 Cases/Yr.
Components:
Continuous Column Still
•2, 15 foot columns separated between the analyzer and rectifier.
•Column has capability to fraction but is currently being used as a stripping still to strip 1,000 gallon batches
•12 inch column diameter
•34 perforated stainless steel plates with down-comers
•Stainless pre-condenser (dephlegmator) is at top of second column and is fed via water leaving the product condenser
•Vapor is generated by steam heat exchanger
•Pre-heater to warm mash entering column with waste heat is included.
•Column is currently plumbed to reflux vapor and flush columns with water from top
•Numerous thermometers and pressure gauge
•Capable of producing 15 gallons per hour at 160 proof from clean wash.
1,000 Gallon Mash Tun
•1,000 gallon steam jacketed Pfaudler processing vessel used as mash tun.
•Steam Jacket
•Dimpled cooling jacket
•2 hp220v 3ph agitator with VFD and gear reduction
•6 inch side drain valve reduced to 4 inches
•2 inch side drain valve
•2 inch bottom drain valve
•Stainless construction with carbon steel legs
•CIP spray ball
•Numerous accessory ports on top
•½ of top can be covered by lid
•Bottom of tank can be set up to lauder with false bottom (has ring around OD and ID) but no false bottom is included.
•Attached ladder
950 Gallon Fermenter
•950 gallon variable capacity fermenter
•Floating lid
•Dimpled cooling jacket
•Side manway
•Sloped bottom
•2 inch bottom drain valve
•2 inch side drain valve that pulls from top of grain bed
•Thermometer
•Sample Port
•Accessory port used for aeration
•Stainless construction with carbon steel stand
800 Gallon Fermenter
•800 gallon single wall tank used as fermenter
•Hinged lid
•Dished bottom
•CIP ball
•Agitator (no motor included)
•1.5 inch bottom drain valve
•All stainless construction
GAI 500 Gravity Filler
•GAI 500 Monobloc 12 spout gravity filler
•Vacuum corker
•Vacuum pump
•High/Low selectable speed
•Has optional foot pedal for operation
•1.5 inch feed port
•Adjustable inlet valve
•Adjustable table height (fill height)
•220v 3ph
OMB ET 1500 Pressure Sensitive Labeler
•Adjustable speed
•Capsule magazine and applicator
•Capsule heat gun with adjustable thermostat
•Capable of single or double (front only or front/back) label application
•Safety gaurds
•Adjustable width and height to accommodate different sized bottles
•220v 3ph + pneumatic
Kiesel SP-12 Progressive Cavity Pump
•Variable speed
•220V 3ph
•4 inch inlet and outlet
•Includes 2, 8 foot hoses and 1, 16 foot hose