Used 2400 Liter (635 Gallon) working capacity Fryma model VME-2400 vacuum mixer. Machine # M10510, built 1984. The tank has an overall height is 101" to top of lid including legs. It is 87" to the top with the lid removed. The overall diameter of tank with jacket is 63". The interior dimensions are 61" diameter with 54" straight side height, 11" dome top and 11" dish bottom. Working temperatures are 150 deg C the interior and the jacket. The interior has a pressure rating of -1/+1 bar and the jacket has a 2.5 bar rating. There are two agitator drives, a 7.5 HP motor drives a center 3 prop agitator and a scrape agitator through a chain drive and a 50 HP motor drives a disperser type agitator off to the side of the center shaft. The top has an 8" flanged opening that is clamped shut and 6" glass inspection port with light. Top also has a 2" sanitary, 1.5" sanitary, and (2) 1" threaded fitting. The bottom has a 6" sanitary discharge with a pneumatically operated valve. Requires 230/ 460 vac 3 phase electrical supply. Previously used for toothpaste. Good Condition.

Unused Fryma Processing Plant Model VME-50. 50 liter working capacity, 316-stainless steel contact parts, hydraulic lift, full controls, vacuum pump, Lauda LTH-140 Thermostatic Circulator (automatic temp. control), three agitators oncluding a scraper, disolver and colloid mill. The scraper-stirrer motor is .25 kw and 910 rpm, the dissolver motor os 1.1-1.8 kw and 685/1360 rpm, the colloid mill motor is 2.0-2.6 kw and 1450/2820 rpm. Designed for ointments with insoluble powders.

One used Fryma Processing Plant Model VME-50. The unit has a 50 liter working capacity, internal pressure rated to -1 Bar, jacket rated to 3 Bar, stainless steel contact parts, hydraulic lift, with a 7.5 HP scraper, a 3 HP disperser and a colloid mill, 230/460/60/3, serial M14536, built 1990, designed for creams and ointments.