Used 14" Dia KWS Manufacturing Enclosed Tube Screw Conveyor, Model 14DIAX18-OLG, 304 Stainless Steel, Horizontal. 14" Diameter x 216” long x approximate 3" pitch screw, approximate 8.1 screw rpm. Designed to convey 11 cubic feet per hour of 60 pounds per cubic foot material. Jacketed trough rated 247 psi at -20 to 392 degrees F. Driven by a 1hp, 3/60/230/460 volt, 1650 rpm gear motor, ratio 204.42 to 1. Mounted on a saddles. Serial# 0085552, built 2012.

Used 400 Gallon A&B Process Systems 304L Stainless Steel Reactor. Vertical. 54" Diameter x 24" straight side, Dished top, jacketed hemispherical bottom. Internal rated 150 psi at -20 to 425 degrees F., 304L stainless steel jacket rated 150 psi at -20 to 425 degrees F. Off center top entering angled anchor agitator with scrapers, driven by a 10hp, 3/60/230/460 volt, 1770 rpm gear motor, ratio 40.80 to 1. Top 18" man way with davit arm cover, 4" center bottom outlet. Mounted on (3) side lugs. Serial# 1118160301B, National Board#1606, built 2012.

Used 200 Cu Ft 304 Stainless Steel Custom Built Continuous Mixer. Non-jacketed trough approximate 60” wide x 144” long x 60” deep. Approximate 8” diameter shaft with a single outer ribbon 3” wide x 3/8” thick, welded to 3” wide bars. Bolt on top cover with openings, end bottom outlet. Driven by a 3 HP, 3/60/230/460 volt, 1735 rpm gear motor.

Used 50HP IKA Works Inline Dispax Reactor Mixing/Homogenizing/Dispersing. Model DR-PB 2000/20. Nominal flow rate 30 gallons per minute, solids capacity 6200 pounds an hour. Driven by a 50hp, 3/60/460 volt, 3535 rpm motor. 4" Solid inlet, 3" liquid inlet, 2" outlet. Unit mounted on a base Part# P015897, serial# 2603-12.

Used 30 HP IKA Works Dispax Reactor High Shear Inline Disperser, Model DR 2000/10, Stainless Steel. Nominal flow rate 35 gallons per minute, nominal tip speed 4500 feet per minute. Driven by a 30hp, 3/60/230/460 volt, 3525 rpm motor. 2" Inlet & outlet. Unit mounted on a base. Part# P015742, serial# 2599-12.

Unused 150HP IKA Works Colloid Mill Model MK 2000/50. Stainless Steel. Rotor speed 1265 RPM. Max throughput 80000L/hr. 150HP 460V/60Hz TEFC Motor. 8" Inlet, 6" outlet. Flowserve 6L mechanical seal reservoir. CS Base Mounted. Serial #2758-16. Dimensions 1641mm H x 1725mm L x 800mm W. 3500 kg. (Also see 16515 and 16516).

Unused 150HP IKA Works Colloid Mill Model MK 2000/50. Stainless Steel. Rotor speed 1265 RPM. Max throughput 80000L/hr. 150HP 460V/60Hz TEFC Motor. 8" Inlet, 6" outlet. Flowserve 6L mechanical seal reservoir. CS Base Mounted. Serial #2756-16. Dimensions 1641mm H x 1725mm L x 800mm W. 3500 kg. (Also see 16513 and 16516).

Unused 150HP IKA Works Colloid Mill Model MK 2000/50. Stainless Steel. Rotor speed 1265 RPM. Max throughput 80000L/hr. 150HP 460V/60Hz TEFC Motor. 8" Inlet, 6" outlet. Flowserve 6L mechanical seal reservoir. CS Base Mounted. Serial #2757-16. Dimensions 1641mm H x 1725mm L x 800mm W. 3500 kg. (Also see 16513 and 16515).

Used IKA Stainless Steel Colloid Mill Model MK 2000/50.

Cherry-Burrell Reactor, 250 Liter (66 Gallon), Stainless Steel, Vertical. Approximate 24" diameter x 40" straight side, dished bolt on top, dished bottom. Internal rated 45/15 psi at -20 to 350 degrees F., dimple jacket rated 100 psi at -20 to 350 degrees F. Top entering Lightnin agitator, model X5C33, serial# 58110. Approximate 1-1/2" diameter shaft with (2) 2 blade turbines, driven by a 2hp, 3/60/208-230/460 volt, 1725 rpm motor. Approximate 3" center bottom outlet. Mounted on 3 stainless steel legs. Serial# E-284-96, National Board# 4556, built 1996.

Used 158 Gallon (600 liter) 316L Stainless Steel Reactor. Manufactured by Lee Industries. Model 600 LU. Internal rated 40 psi @ 300F. 304 stainless steel Uniflow coil jacket rated 100 psi @338F. Off-center top entering Lightnin agitator, model V6S18N, serial# 96/E83470. Approximate 1-1/2" diameter shaft with (2) 2 blade turbines, driven by a 0.25hp, 3/60/230/460 volt, 1725 rpm motor. Openings top (3) 1-1/2" tri-clamp, 2" tri-clamp, 4" tri-clamp, (3) 1", 18" man way with cover with a 3" tri-clamp and a 4" tri-clamp with sight glass. 2" Tri-clamp center bottom outlet. 2" Diameter x 39" straight side, dished top and bottom. Mounted on 4 stainless steel legs with casters. Serial# C6153D11. National Board# 7686. Built 1999.

Precision Stainless Kettle, 300 Liter (79 Gallon), Stainless Steel, Vertical. Internal rated atmospheric at -20 to 350 degrees F. 304L Stainless steel dimple jacket rated 90 psi at -20 to 350 degrees F., vacuum design 15 psi. Dish top/bottom. 1/5" Center bottom outlet. Serial #5799-2. National Board #4126. Built 1992.

Used 52 Gallon Cherry-Burrell Pressure Tan. 200 Liter. 316L Stainless Steel, Vertical. Approximate 24" diameter x 31" straight side, dished clamp top, dished bottom. Internal rated 45 psi at -20 to 350 degrees F. Approximate 1" center bottom outlet. Mounted on 4 stainless steel legs with casters. Serial #F-289-96. National Board #4562. built 1996.

Alfa Laval Desludger Disc Centrifuge, Model BRPX207-SGV-34. 316 Stainless steel on product contact areas, clarifier design. Water harness, 7.5 hp motor, sludge tank, and control panel. Mounted on a sub-base.

Used 57" Sweco GyraMax Rectangular Gyratory Sifter, Model GST-5X12C6. (3) 57" wide x 120" long 316 stainless steel screens, carbon steel housing and frame. Driven by a 5 hp, 3/60/208-230/460 volt, 1170 rpm motor. Serial # 028559-A02/13. Built 2013.

Wallace 7.5 Ton Gantry Crane, Model 1516-15. Carbon steel frame approximate 170” wide x 149” tall. Includes a manual Harrington chain hoist. SO#S55793.

Hoover Container Solutions Liquid Tote, 1325 Liter (350 Gallon), IBC Type 31A, 304 Stainless Steel. Approximate 41" x 48" x 36" tall. Maximum gross weight 2735 kg. Serial #236563, built 2012.

Hoover Container Solutions Liquid Tote, 1325 Liter (350 Gallon), IBC Type 31A, 304 Stainless Steel. Approximate 41" x 48" x 36" tall. Maximum gross weight 2735 kg. Serial #236558, built 2012.

Hoover Container Solutions Liquid Tote, 1325 Liter (350 Gallon), IBC Type 31A, 304 Stainless Steel. Approximate 41" x 48" x 36" tall. Maximum gross weight 2735 kg. Serial #236559, built 2012.

Hoover Container Solutions Liquid Tote, 1325 Liter (350 Gallon), IBC Type 31A, 304 Stainless Steel. Approximate 41" x 48" x 36" tall. Maximum gross weight 2735 kg. Serial #236549, built 2012.

Snyder Industries Liquid Tote, 1325 Liter (350 Gallon), IBC Type 31A, 304 Stainless Steel. Approximate 41" x 48" x 36" tall. Serial #0706771803.

Snyder Industries Liquid Tote, 1325 Liter (350 Gallon), IBC Type 31A, 304 Stainless Steel. Approximate 41" x 48" x 36" tall. Serial #0706771820.

Used 300 Cu Ft Stainless Steel Live Bottom Hopper. Top cover, bottom outlet with an approximate 10" diameter x 90" long discharge screw. Mounted on a carbon steel frame.

Brabender Technologie Loss In Weight Feeder, Model DDW-MS-FW155N-600-ISC. Approximate 6” diameter x 40” long blade screw, maximum feed rate 816 cubic feet per hour. Top mounted 600 liter extension hopper. Mounted on a carbon steel frame. Serial#WO19739/1, built 2012.

A&B Process Systems Reactor, Approximate 400 Gallon, 304L Stainless Steel, Vertical. 54” Diameter x 24” straight side, Dished top, jacketed hemispherical bottom. Internal rated 150 psi at -20 to 425 degrees F., 304L stainless steel jacket rated 150 psi at -20 to 425 degrees F. Off center top entering angled anchor agitator with scrapers, driven by a 10hp, 3/60/230/460 volt, 1770 rpm gear motor, ratio 40.80 to 1. Top 18" man way with davit arm cover, 4” center bottom outlet. Mounted on (3) side lugs. Serial# 1118160301C, National Board#1607, built 2012.

Used 400 Gallon A&B Process Systems 304L Stainless Steel Reactor. Vertical. 54" Diameter x 24" straight side, Dished top, jacketed hemispherical bottom. Internal rated 150 psi at -20 to 425 degrees F., 304L stainless steel jacket rated 150 psi at -20 to 425 degrees F. (2) Off center top entering angled agitators. (1) Lightnin Model X6S150, Serial # 2719729, driven by a 1.5 hp, 3/60/208-230/460 volt, 1725 rpm motor, (1) anchor agitator with scrapers, driven by a 10 hp, 3/60/230/460 volt, 1770 rpm gear motor, ratio 40.80 to 1. Top 18" man way with davit arm cover, 4" center bottom outlet. Mounted on (3) side lugs. Serial # 1118160301A, National Board # 1605. Built 2012.

Tank, Approximate 300 Gallon, Stainless Steel, Horizontal. Approximate 36” diameter x 60” straight side, dished heads. Mounted on a carbon steel legs.

Used 1500 Gallon Andy J. Egan 316L Stainless Steel Jacketed Tank. Vertical. Approximate 72” diameter x 84” straight side, slight coned top, cone bottom. Jacketed, no rating. Off center top entering angled Lightnin agitator, model X6S200, serial# 2636787. Approximate 1-1/2” diameter shaft with (1) 3 blade turbine, (1) 3 blade prop, driven by a 2hp, 3/60/208-230/460 volt, 1725 rpm motor. (2) Spray balls. Openings top 2”, (2) 3”, (2) 4”, 6” drive, sight glass, 24" man way with cover, side (3) 3”, 4” center bottom outlet. Mounted on (4) 304 stainless steel legs. Built 2011.

Used 1500 Gallon Andy J. Egan 316L Stainless Steel Jacketed Tank. Vertical. Approximate 72” diameter x 84” straight side, slight coned top, cone bottom. Jacketed, no rating. Off center top entering angled Lightnin agitator, model X6S200, serial# 2636792. Approximate 1-1/2” diameter shaft with (1) 3 blade turbine, (1) 3 blade prop, driven by a 2hp, 3/60/208-230/460 volt, 1725 rpm motor. (2) Spray balls. Openings top 2”, (2) 3”, (2) 4”, 6” drive, sight glass, 24" man way with cover, side (3) 3”, 4” center bottom outlet. Mounted on (4) 304 stainless steel legs. Built 2011.

Used 1500 Gallon Andy J. Egan 3116L Stainless Steel Jacketed Tank. Vertical. Approximate 72" diameter x 84" straight side, slight coned top, cone bottom. Jacketed, no rating. Off center top entering angled Lightnin agitator, Model X6S200, Serial # 2636788. Approximate 1-1/2" diameter shaft with (1) 3 blade turbine, (1) 3 blade prop, driven by a 2 hp, 3/60/208-230/460 volt, 1725 rpm motor. (2) Spray balls. Openings top 2", (2) 3", (2) 4", 6" drive, sight glass, 24" man way with cover, side (3) 3", 4" center bottom outlet. Mounted on (4) 304 stainless steel legs. Built 2011.

Used 1500 Gallon Andy J. Egan Jacketed SS Tank. 316L Stainless Steel, Vertical. Approximate 72” diameter x 84” straight side, slight coned top, cone bottom. Jacketed, no rating. Off center top entering angled Lightnin agitator, model X6S200, serial# 2636791. Approximate 1-1/2” diameter shaft with (1) 3 blade turbine, (1) 3 blade prop, driven by a 2hp, 3/60/208-230/460 volt, 1725 rpm motor. (2) Spray balls. Openings top 2”, (2) 3”, (2) 4”, 6” drive, sight glass, 24" man way with cover, side (3) 3”, 4” center bottom outlet. Mounted on (4) 304 stainless steel legs. Built 2011.

Used 1500 gallon Andy J. Egan SS Jacketed Tank. 316L Stainless Steel, Vertical. Approximate 72” diameter x 84” straight side, slight coned top, cone bottom. Jacketed, no rating. Off center top entering angled Lightnin agitator, model X6S200, serial# 2636790. Approximate 1-1/2” diameter shaft with (1) 3 blade turbine, (1) 3 blade prop, driven by a 2hp, 3/60/208-230/460 volt, 1725 rpm motor. (2) Spray balls. Openings top 2”, (2) 3”, (2) 4”, 6” drive, sight glass, 24" man way with cover, side (3) 3”, 4” center bottom outlet. Mounted on (4) 304 stainless steel legs. Built 2011.

Used 1500 Gallon Andy J. Egan SS Jacketed Tank. 316L Stainless Steel, Vertical. Approximate 72” diameter x 84” straight side, slight coned top, cone bottom. Jacketed, no rating. Off center top entering angled Lightnin agitator, model X6S200, serial# 2636789. Approximate 1-1/2” diameter shaft with (1) 3 blade turbine, (1) 3 blade prop, driven by a 2hp, 3/60/208-230/460 volt, 1725 rpm motor. (2) Spray balls. Openings top 2”, (2) 3”, (2) 4”, 6” drive, sight glass, 24" man way with cover, side (3) 3”, 4” center bottom outlet. Mounted on (4) 304 stainless steel legs. Built 2011.

Andy J. Egan Jacketed Tank, Approximate 1500 Gallon, 316L Stainless Steel, Vertical. Approximate 72” diameter x 84” straight side, slight coned top, cone bottom. Jacketed, no rating. Off center top entering angled Lightnin agitator, model X6S200, serial# 2636799. Approximate 1-1/2” diameter shaft with (1) 3 blade turbine, (1) 3 blade prop, driven by a 2hp, 3/60/208-230/460 volt, 1725 rpm motor. (2) Spray balls. Openings top 2”, (2) 3”, (2) 4”, 6” drive, sight glass, 24" man way with cover, side (3) 3”, 4” center bottom outlet. Mounted on (4) 304 stainless steel legs. Built 2011.

Andy J. Egan Jacketed Tank, Approximate 1500 Gallon, 316L Stainless Steel, Vertical. Approximate 72” diameter x 84” straight side, slight coned top, cone bottom. Jacketed, no rating. Off center top entering angled Lightnin agitator, model X6S200, serial# 2636797. Approximate 1-1/2” diameter shaft with (1) 3 blade turbine, (1) 3 blade prop, driven by a 2hp, 3/60/208-230/460 volt, 1725 rpm motor. (2) Spray balls. Openings top 2”, (2) 3”, (2) 4”, 6” drive, sight glass, 24" man way with cover, side (3) 3”, 4” center bottom outlet. Mounted on (4) 304 stainless steel legs. Built 2011.

Used 1500 Gallon Andy J. Egan 316L Stainless Steel Jacketed Tank. Vertical. Approximate 72" diameter x 84" straight side, slight coned top, cone bottom. Jacketed, no rating. Off center top entering angled Lightnin agitator, Model X6S200, Serial # 2636796. Approximate 1-1/2" diameter shaft with (1) 3 blade turbine, (1) 3 blade prop, driven by a 2 hp, 3/60/208-230/460 volt, 1725 rpm motor. (2) Spray balls. Openings top 2", (2) 3", (2) 4", 6" drive, sight glass, 24" man way with cover, side (3) 3", 4" center bottom outlet. Mounted on (4) 304 stainless steel legs. Built 2011.

Used 1500 Gallon Andy J. Egan 316L Stainless Steel Jacketed Tank. Vertical. Approximate 72" diameter x 84" straight side, slight coned top, cone bottom. Jacketed, no rating. Off center top entering angled Lightnin agitator, Model X6S200, Serial # 2636800. Approximate 1-1/2" diameter shaft with (1) 3 blade turbine, (1) 3 blade prop, driven by a 2 hp, 3/60/208-230/460 volt, 1725 rpm motor. (2) Spray balls. Openings top 2", (2) 3", (2) 4", 6" drive, sight glass, 24" man way with cover, side (3) 3", 4" center bottom outlet. Mounted on (4) 304 stainless steel legs. Built 2011.

Used 1500 Gallon Andy J. Egan 316L Stainless Steel Jacketed Tank. Vertical. Approximate 72" diameter x 84" straight side, slight coned top, cone bottom. Jacketed, no rating. Off center top entering angled Lightnin agitator, Model X6S200, Serial # 2636798. Approximate 1-1/2" diameter shaft with (1) 3 blade turbine, (1) 3 blade prop, driven by a 2 hp, 3/60/208-230/460 volt, 1725 rpm motor. (2) Spray balls. Openings top 2", (2) 3", (2) 4", 6" drive, sight glass, 24" man way with cover, side (3) 3", 4" center bottom outlet. Mounted on (4) 304 stainless steel legs. Built 2011.

Used 1500 Gallon Andy J. Egan 316L Stainless Steel Jacketed Tank. Vertical. Approximate 72" diameter x 84" straight side, slight coned top, cone bottom. Jacketed, no rating. Off center top entering angled Lightnin agitator, Model X6S200, Serial # 2636795. Approximate 1-1/2" diameter shaft with (1) 3 blade turbine, (1) 3 blade prop, driven by a 2 hp, 3/60/208-230/460 volt, 1725 rpm motor. (2) Spray balls. Openings top 2", (2) 3", (2) 4", 6" drive, sight glass, 24" man way with cover, side (3) 3", 4" center bottom outlet. Mounted on (4) 304 stainless steel legs. Built 2011.

Used 100 Gallon Andy J. Egan 304 Stainless Steel Tank., Vertical. Approximate 24” diameter x 48” straight side, dished bolt top, dished bottom. Top entering Lightnin agitator, model X5S33, serial# 2636794, driven by a 0.33hp, 3/60/208-230/460 volt, 1725 rpm motor. (3) Sidewall baffles, strap on panel jacket. Openings top (3) 1”, 2”, 3”, 4”, 6”, side (4) 3”, 2” center bottom outlet. Mounted on (4) stainless steel legs. Built 2011.

Andy J. Egan Tank, Approximate 100 Gallon, 304L Stainless Steel, Vertical. Approximate 24” diameter x 48” straight side, dished bolt top, dished bottom. Top entering Lightnin agitator, model X5S33, serial# 2636793, driven by a 0.33hp, 3/60/208-230/460 volt, 1725 rpm motor. (3) Sidewall baffles. Openings top (3) 1”, 2”, 3”, 4”, 6”, side (4) 3”, 2” center bottom outlet. Mounted on (4) stainless steel legs. Built 2011.

Used 200 Gallon Andy J. Egan 304 Stainless Steel Tank. Vertical. Approximate 30" diameter x 60" straight side, dished bolt top, dished bottom. Top entering Lightnin agitator, Model X5S50, Serial # 2636801, driven by a 0.50 hp, 3/60/208-230/460 volt, 1725 rpm motor. Strap on panel jacket. Center bottom outlet. Mounted on (4) stainless steel legs.

Used 200 Gallon Andy J. Egan Stainless Steel Tank. Vertical. Approximate 30" diameter x 60" straight side, dished bolt top, dished bottom. Top entering Lightnin agitator, Model X5S50, Serial # 2636802, driven by a 0.50 hp, 3/60/208-230/460 volt, 1725 rpm motor. Strap on panel jacket. Center bottom outlet. Mounted on (4) stainless steel legs.

Used CIP Stainless Steel Skid. Consisting of: (1) Approximate 1200 gallon stainless steel rinse water tank, (1) 500 gallon stainless steel caustic solution tank, (1) 500 gallon stainless steel acid solution tank, Filter Specialist filter, (1) Goulds 20 hp centrifugal pump, (1) heat exchanger and a control panel with an Allen-Bradley Flex CQ controller, Allen-Bradley PowerFlex 400 drive. Built 2011.

Goulds Centrifugal Pump, Model 3196, Size 3X4-8G, 316 Stainless Steel. Rated approximately 63 gallons per minute at 58' head at 1800 rpm, 275 psi. 4” Inlet, 3” outlet, 8.375” diameter impeller, mechanical seal. Driven by a 7.5hp, 3/60/230/460 volt, 1770 rpm motor. Base mounted. Serial# Q773F275-1, built 2011.

Goulds Centrifugal Pump, Model 3196, Size 3X4-8G, 316 Stainless Steel. Rated approximately 63 gallons per minute at 58' head at 1800 rpm, 275 psi. 4” Inlet, 3” outlet, 8.375” diameter impeller, mechanical seal. Driven by a 7.5hp, 3/60/230/460 volt, 1770 rpm motor. Base mounted. Serial# A773F401-2, built 2011.

Goulds Centrifugal Pump, Model 3196, Size 3X4-8G, 316 Stainless Steel. Rated approximately 63 gallons per minute at 58' head at 1800 rpm, 275 psi. 4” Inlet, 3” outlet, 8.375” diameter impeller, mechanical seal. Driven by a 7.5hp, 3/60/230/460 volt, 1770 rpm motor. Base mounted. Serial# Q773F275-2, built 2011.

Goulds Centrifugal Pump, Model 3196, Size 3X4-8G, 316 Stainless Steel. Rated approximately 63 gallons per minute at 58' head at 1800 rpm, 275 psi. 4” Inlet, 3” outlet, 8.375” diameter impeller, mechanical seal. Driven by a 7.5hp, 3/60/230/460 volt, 1770 rpm motor. Base mounted. Serial# Q773F290, built 2011.

Goulds Centrifugal Pump, Model 3196, Size 3X4-8G, 316 Stainless Steel. Rated approximately 63 gallons per minute at 58' head at 1800 rpm, 275 psi. 4” Inlet, 3” outlet, 8.375” diameter impeller, mechanical seal. Driven by a 7.5hp, 3/60/230/460 volt, 1770 rpm motor. Base mounted. Serial# Q773F291, built 2011.

Goulds Centrifugal Pump, Model 3196, Size 3X4-8G, 316 Stainless Steel. Rated approximately 63 gallons per minute at 58' head at 1800 rpm, 275 psi. 4” Inlet, 3” outlet, 8.375” diameter impeller, mechanical seal. Driven by a 7.5hp, 3/60/230/460 volt, 1770 rpm motor. Base mounted. Serial# A773F401-1, built 2011.